Making an American type casting network with their own hands

How do it yourself from the "Spanish" to make an "American"?

For many years I have been fishing a fish casting network of an American type for many years, and I want to say that it is no less interesting to catch this tackle and sports, rather than catching traditional fishing guns. But once I decided that the arsenal should have a spanish type network. The techniques of casting for these types of networks are neither different from each other, who learned how to throw one network, he will be able to throw another. The decision was made, the Chinese Spanish was ordered via the Internet, but what was in the parcel, plunged me in shock! The network turned out to be a pitiful parody of an excellent fishing instrument. There was no swivel on the network nor a thrown cord. After the first casts began to fall off the ship. The network with great difficulty was revealed, the maximum for radius 2 is 2.5 meters, instead of the promised 4 meters. As later it turned out, the cargo cord was only 9.5 meters long and weighing 2.5 kg. The first desire was all this to throw and forget. But we are not looking for light paths and I am not an exception, and in every tackle, a real fisherman should invest a particle of his soul. A little cooled and thinking the idea that with minimal costs from this semi-finished product could be a good American. I started a business.

The first thing I did is cut tied pockets. Pockets were straight and essentially been a continuation of the main cone. Extending the network in length, measured the radius, it turned out to be 3.5 meters. Then got rid of the "cargo cord". In the store, the household goods purchased a braided cape cord with a diameter of 5 mm (its length, we determine the formula, the length of the circle 2πr). I got 22 meters. Take the cord through the lower cells of the network, I dealt it to the maximum possible diameter. And then it turned out that the cone of the network was incorrect (the upper part of it) - it is ruthlessly cut off, we do not need an excess stocking that will only be interpreted when placing the network. As a result, it turned out perfectly round cloth with a diameter of 5 meters. In the length of the cord, which should become a cargo introduce amendments R = 2.5M multiply on π, approximately equal to 3.14 and multiply on 2, we get 15.7 meters. Thus, the diameter of our future American will be 5 meters, and whatever it opens well and quickly tone must complete one more condition - the weight of the cargo cord must be at least 1.2 kg. on the network radius, or 200 -250 gr. on the meter of the cord. More can be, but within reasonable limits. For my option, it is 3 - 3.5 kg. It remains only to calce down the ship.

It is not done at all difficult, there would be a lead at hand. And get it quite simple. In any tire terminal there are old balancing loads - just that we need. We still need a plaster form for casting (I will not describe how to do it, on the Internet on this topic there is enough material) and a steel rod with a diameter of 5 mm. Then we cast the amount of loads you need. I got the weight of one loaded 45 gr., Total number of 80 pcs., Total weight of 3.6 kg. You can reduce the weight of the load, but increase their number, it will be even better for the network disclosure. It is very important that the total number of shipments was multiple 4. Why so, we will talk in the topic about the slings.

Next, we need to put our cloth on the cargo cord. To do this, it is necessary to properly place the load, on the cargo cord and calculate the number of the pipe that must be landed between the cargo. This is a simple mathematics, the length of the cord is divided by the amount of sore and get the distance between the goods centers. For one cargo I got two cells, and six honey loads. For the convenience of landing, we make measurement equal to the distance between the loads, according to which the felt-tipper mark where the next cargo should stand. And then the planting node plant our canvas, two cells on the cargo, and between the loads every cell on the cord. At the end of the landing, the cord must be glued. This is done with a lighter. We pay two ends, press them with each other, and as soon as they are slightly cool, ride them with your fingers. In place of gluing plant the last cargo. The most time-consuming part of the work is completed and at this stage you can test our network to open. And it seems everything turned out!

The neck of the basic network of american typeTop view of the neck of a basic network of american typeNow the turn has come to make the neck of our network. The part to which will be attached to the top of our networking (cone) and in which the slings will have to pass. You can make this node from anything. For example, you can use an adapter for PVC pipes, the neck from the siphon (I saw this option, but it seemed to me very cumbersome) or a connector for the hose and much from something. I did it from the connector for the hose. Having cutting down the lower part. Putting the neck to the canvas we can proceed to the next stage - the stalls.

The slings are needed to pull our network into a bag in which the caught fish will remain. For sling, we use a line with a diameter of 0.8 to 1.5 mm. It remains to refine their number and length. The more Lock, the more dense the goods will be converged and less fish will go, but do not forget about the principle of reasonable sufficiency. For my option, there were 20 pieces.

Connector for hose

Why exactly so much you ask? Why not 30 or 25? I remember a little earlier we mentioned that the number of goods should be multiple of four, which is why the sling we turned out 20. By tied the first sling every subsequent we will tie to the cord through four cargo, in the middle between them. Bind a long-known to each fisherman with a node. But we will do this operator somewhat later. First, we need to prepare the segments of the fishing line for our sling. Since the network radius is 2.5 meters, it is necessary to cut off 10 segments of the fishing line for a long 6 - 6.5 meters. Align the fishing line and bending the segments exactly in the middle, we draw in the swivel, after which we tighten. So that our slings do not slip them on the swivel need to be kept, or put on them a heat shrinking tube. When throwing, the slings should not be twisted, so they must be divided using a simple device depicting in the photo. It remains for us to measure the length of the sling and you can start boarding them on the cargo cord. It is very important that the length of the sling was at 2-2.5 cm. Basic network radius. In my case it is 2.525 meters. From the delimiter, measure this distance and mark each row with a marker. We encourage the slings in the neck, expand the network on the flat site (but it is not necessary) and tie them to the cargo cord, one after every four cargo in accordance with the labels of the printed marker.

Knot for tied sling to casting network, AmericanSo that is all! Our network is ready! It remained to tie a shock cord (it should be braided, without a core and should not be confused when casting), to carry out the last test on the opening, on the convergence of goods and on the formation of the bag. Now you can go fishing and luck will not go on the side!

For this network refit, I needed a 2 kg plaster (40 rubles), swivel (90 rubles), lead 4 kg (free), braided cape cord with a diameter of 5mm 16 meters (160 rubles), a caprony thread (was in old reserves), Connector for hose (25 rub.), Lesketer with a diameter of 1 mm 65 m (old stocks), shock cord 10 m (36 rubles). And 351 rubles spent.

As well as a bit of patience and time (this is priceless!).

I also want to add that not all Chinese spanish-type casting networks require such significant costs of time and effort when changing citizenship. For the castine network presented in the photo, for example, it will only be necessary to make the neck and tie the slings. I will write more about this next time.

Article author: Victor Pelley.

Categories

Weaving independent "American women"

He has certain prices:

  • Disadvantages of such a gear is not budget;
  • Get cast packaging do not in your height or weight.

It is not a strengthening pleasure that the catch will come, but from the fact that their preferences are embodied personally, having learned how the fishing network is to weave.

And the catch will be provided with casting designs of the movements, or "American women", or "Spanish". These are the formats of lovers for catching fish by Latin Americans and south-inhabitants-East Asia.

And in the video, make sure of the catch of speed: five to ten seconds - and pull out another fish on or tu shore or with a dozen medium size, which is found in a concrete reservoir.

You have time not spinning even throw, and then drag with a crochet blank to the shore during the same time.

Set of necessary height

At the same time you need to capture the cell, pull the thread and pinch your finger. Using a shuttle, a node is tied and delayed.

This is how gradually, the loop of the loop, and the process of weaving the network occurs. When a row is tied to the end, you must remove the bar.

Similarly, you need to gently determine the network to the desired length. When the cloth is ready to fully fully, it must be equipped - carefully skip the threads around the edge, impose floats and loaded.

What's the tackle - Volokusch

Of course, the modern market offers many different network cloth options. In this case, the industrial production is very high-quality.

If you compare with homemade options, the first will be significantly superbilled in quality. There are only two main disadvantages: a fairly high price and the need to search exactly the option you need.

Knitting network is a long enough process. But, at the same time, you can make exactly the tackle that you wanted. Sometimes for fisherman is fascinated not only by the catch, but also preparation for it. Having spent my work by creating my own tackle, and, having received a good catch, the fisherman is unlikely to regret it.

In terms of its properties and design, with some differences is just a nemid. Fishing method and various design solutions:

  • The nehid is thrown off the boat or vessel, the voltage stretch and pull people;
  • Differences in the depth on which fishing is conducted. You can only be caught in a place where the fishermen pulling his pulling fishermen will be held. Neod are used at various depths;
  • The length of a random is a maximum of 50-70 meters. Although it will not be easy to drag such a tackle. The optimal length of its 30 meters, for wide rivers, lakes and sea water. And it is more often used on the ponds, for driving along the shore. Length depends on the water branch and strength of the fishermen.

The design of Volokushi.

It has very few differences from the design of the non-day and measuring. Wings, moore, upper cord, bottom selection. Depending on the type of fish, which is hunting, take various networks with a different cell size and thread thickness. Frequently used fine network, with a cell greater than 25-30 mm.

The lower cord is equipped with vessels for better fit to the bottom, the float is imposed on the top selection. They must keep the top tackle

Their number and size are selected to perform this task. This should be paid attention to the purchase of ready-made volokus in the store.

At the ends of the wings, on top and bottom, small segments of cords are made to fix the chalks (wooden or metal rods). They are used for driving, pulling out the coast of Radia. As a rule, the lower selection makes a little less than the upper one. This makes it possible when pulling out a random to the shore, do not miss the fish.

By simple improvement, the wedding can be easily remade into the fight for catching cancer and bottom fish. For this, the lower selection is made of pipes, and better to tie the chain. For the stiffness of the design, the wrenches are trimmed through the entire perimeter. Such a design can drag one person.

The brace is tightly pressed for the bottom and even plunges a little in IL. Muna in such a tackle makes short. It makes her long on the womb. At the very end, the load is enshrined over 300 g. This is done to prevent the removal of a lightweight coution of the wings on a strong passing current.

The entrance to the empty should be large. It is almost always equal to the wing wing wing. But here it is worth considering the depth of the reservoir. The size of the coutation should be sufficient length to prevent the possibility of exiting the caught fish. To do this, on the volokusch, the throat is made for fish.

Node formation scheme

To solve the network for fishing, you need to know the nodes' weaving scheme, because it is exactly the strength of the structure (Figure 5).

Step-by-step knitting process of fishing or thread looks like the following:

  1. First you need to manually link the loop the initial, and then bring the pattern to it and turn the shut in it into it.
  2. Through the loop, the thread should be sealing to the end of the template. This with the material should go over now. Hold you thread with your finger so, the shuttle is moving freely.
  3. Under the big, the loop is formed with a finger, which is necessary to hold the final to the revealed formation of the node with the soch.
  4. The shuttle loop in spending, capturing the thread past hinges from the side of both. It is difficult, but after training it is quite possible.
  5. Now we skip the shuttle directing, re-reappear between the right loop side and thread.

After the double-to-sell was performed, you need to skip through the shuttle loop in the direction from top to bottom, the first using the loop that you held with your finger.

Options 5. Drawing knitting knots for fastening remains

Cells are just tightening the knot. It is necessary to do it synchronously: pulling the thread of the shuttle and relaxing simultaneously clamping your finger. If everything was done correctly, the node will delay with the quiet rules.

Fishing casting network

Fishing by the casting network is conditionally divided into several categories, by no means mutually exclusive:

  1. Catching a life.
  2. Catching small art fish as fishing.
  3. Hunting for large fish.

Catching fish casting network is a whole art. Tackle actually resembles a parachute. And in order for it to reveal, it must be pre-put first.

If the network is clean, you can start "laying". First, the tackle is stacked in a clean bucket, starting from that edge to which the loads trailed.

The network is collected in a single, smooth harness and stacked in a bucket, better than rings. Then the main cord is stacked.

He himself is recruited on his hand (in a fist) rings before the place where the network begins. The cape itself is folded by one ring.

It is impossible to pull for the central cable strongly. Otherwise, the slings are messed up with networks.

The lower edge with loads is conditionally divided into two beams. The edge of one is taken into the left hand, and the edge of another in the right. A semicircular wave rushes so that, unfolding in the air, covered as many squares as possible. When the tackle goes under the water completely, jerks for the cord. The slings pull up the edges, turning the dome into a tightened bag with a catch.

Regarding the choice of the most optimal size of the network for beginners, unfortunately, there is no consensus. Some advise to start trying a smaller diameter network that provides ease of cast.

The rest are advised to immediately train on professional networks, since, having mastered the three-function network after it is pretty hard to go to the larger diameter network. Also, the choice of the size of the network directly depends on the physical characteristics of the fisherman, the higher the height and longer hand, the way it is easier to work with a large-scale network.

Catch the casting network small fish is quite easy and simple. The main thing in this matter is the right time and place of fishing.

By fulfilling only one successful casting can be sent to a bucket of not one dozen small fish. But now you can proceed to catching larger copies of fish.

Taking into account the fact that the fishing of the casting attitudes, as a rule, assumes fishing at a small depth and in the visibility zone for fish of the fisherman himself, which is also forced to make sharp sweeping movements when casting a grid, it means that the fish, in any way The case is a large and careful in transparent water fisherman sees and frightened.

So spring and period of flooding with her turbid water is a lot of advantages for this type of fishing.

Firstly, this is a cloud of mad water - no wonder there is an old Russian expression "catching fish in muddy water" meaning the ease of access to something using the situation. Here, because of poor visibility in the water, we have the advantage that we can approach the fish almost closely without moving it away.

Legalization of fishing fish nets for individuals.

Article-reasoning.

I consider it quite different. Why? I'll tell you ...

What is meant by poacher?

According to dictionaries and Wikipedia, this is the one who is engaged in poaching, that is, hunts or catches the fish in prohibited places, at a prohibited time or forbidden way, and also carries out an unlawful cutting down of the forest, collecting berries and t.

n. That is, about the network here, if you do not count the prohibition only for individuals in some departmental orders, there are no speech.

Create jur. Face, follow the rules and catch.

As for the "chaspherchism" ...

Fishing casting network

The casting network has many names: cape, cape, woofing, coat, parachute. Oddly enough, lovers caught by the casting network and especially the specialists of this catch occurred from us quite rarely. Causes of this set. Historically, it was historically catching a cape network was a traditional way of fisheries in countries mostly southern (South America, Asia). Fishermen in those parts are engaged in such fishing from childhood and results achieve striking.

Poachers caught 317 kg of fish did not suffer punishment

A group of fishermen at the interrogation opened the name of the secret bait.

Rubric: Regional News.

Read more →

Tourists with amazement are observed as the native fisherman far makes the incomprehensible bundle, that on the summer unfolding into a large round network, which soon returned from turbid waters with rich catch. The amazement was replaced by a completely legitimate desire: we want to catch the same way! As a result, the casting network rapidly began to conquer non-traditional countries.

Principle fishing

The principle of fishing is as follows: the network is collected in a certain way (so that it is easily unfolded in flight), then horizontally attacked the water and covers the water section corresponding to the diameter of the opened network. After the outgoing part of the network drops to the bottom, the network is pulled out for the cord attached to the base. Fish fishing is possible in the thickness of water, without lowering gear on the bottom, but this requires a network of several modified design.

Features

The casting network with a ring is a large woven material having a cellular surface. Such tackles are thrown into the water, after which they are almost immediately deployed.

Such fishing devices for hunting equipped with a large ring work on a special principle and make it possible to throw a casting network with a radius of 2.7 m, even being in a boat or rubber boat.

Casting models are most often used in the process of sports catch. They are not installed inpatient and do not move with the help of a boat. Hunting with their help is manually. These cellular canvas for fishing are designed for quite high physical activity of the fisherman.

Tackle has special functionality and low cost. Such a cellular product consists of a round-shaped network product, the edge of the material will always be trimmed with a reliable cord of a large thickness, on which a sufficient amount of heavy loads are fixed.

Casting samples can be divided into two large groups.

American models. Such varieties are much easier to throw into water and allow for a wonderful catch. American samples are distinguished by an increased malformation and simplicity of self-creation. In addition, these varieties of casting gear are most often performed from the most durable, but soft materials. For a more free and easy opening of a one-fabric, it is defensive in the process of manufacture.

Separately, it should be noted that in American form the central cord will be fixed with another end to a variety of stalls that stretch to the cargo cord. In Spanish samples, it is attached to the central network. It is this feature that makes it first to distinguish the tackle, allocating different principles of their work.

These gear can be made from various soft materials. Consider each of the options separately.

Monophilement. This basis for weaving the fishing network has quite high strength, it will save it in the node. In addition, the material boasts excellent flexibility and elasticity. As a rule, the smoother of the thread surface, the less durable it will be the knot from it, which is why more nodes knit on monofilament threads. But it is worth remembering that such networks will not have too high wear resistance. These networks of networks are practically transparent, so they are not visible at all in the thickness of the water, they will not scare away the fish.

It should also be noted that a large number of casting networks with different dimensional values ​​are currently produced. For newcomers, the most miniature models, designed for a small amount of caught prey be able to become the best option.

If we are talking about professional fishing, then the preference should be given to varieties with a radius of 1.6-2 meters. When choosing the most suitable option, it is necessary to take into account some physical features of a person: what will be higher than its growth and longer hands, the easier it will be long-range casts to large cellular cavities.

Knitting technique node

Thus, under the thumb formed a small loop that you need to hold down until the completion of the node. After that, a shuttle is passed into the finished loop so that the thread was able to cover the loop from two sides. After that, the shuttle starts re-between the right edge of the loop and the thread already spent.

After this double thread product, he starts again in the loop, which was fixed to the thumb until then. In this case, the tightening of the node occurs synchronously and is very easy, on one side the shuttle strongly pulls the thread, and the thumb reduces pressure on the created loop. The characteristic clock sound is a node readiness signal.

  • If there is a maximum width of 3 meters and a length of 60 meters, then it should be revealed to the segments of the required size. This is done as follows.
  • The cutting angle should be about 45 degrees. The number of segments is chosen by even quantity, for example, 6, 8, 10 wedges, etc. To understand the manufacturing process, you should give preference to 10 wedges. If you fold together the long sides of the wedges, they will give the length of the circumference of the future network. After the final sizes of the cutting, the network is cut into separate fragments, according to the drawing. After that, the resulting billets add up together. At this stage, you can determine the length of the cargo cord.
  • Disinted billets (wedges), using a 0.4 mm fishing line together. As a result, a round network should be turned out or something similar to the circle. In any case, the form of the network can be corrected.
  • Now you can go checked. They are not at all difficult to make themselves, especially since simple and affordable materials will be needed.
  • First you have to buy in the store there are not many building gypsum and stir it by adding the desired amount of water. The mixture should not be too thick, while it should be stirred to a homogeneous state. After that, the mixture is laid out in a pre-prepared form. Then the sample was taken and squeezed in the gypsum corresponding form. It is necessary to ensure that the air outlet hole is.
  • After that, a hole for pouring lead is done. To the center of the scene took place, a nail is installed in the center of the form.
  • After full pouring, the form is abundantly covered with a shampoo. The workpiece should be placed in a container with high sides. The sample must be half into the form. After that, the sample is again filled with plaster, after which everything should dry well. If you do not organize openings for the exit, then the lead will not be able to fully and qualitatively fill out the form.
  • As a result, loads that have an extended shape with the presence of a through hole passing through the center of the cargo should be obtained.
  • Preparation of cargo, you can continue the manufacture of tackle. Before fixing the cargo cord, you need to attach loads. They can be simply put on the cord, and then secure them with a hammer blow. In place of the cord connection, the load is also installed and is clamped in the same way as everyone else. The distance between them can be about 10 cm.
  • At the next stage, the cargo cord is attached to the outside of the future tackle. To begin with, it is unfolded throughout the perimeter of the network and in conclusion, they are reliably tied throughout its perimeter.
  • The next stage consists of the formation of the central opening, where the slings will be held. To do this, the harrow is taken and fastened in the center to the sewer in the same way as the cargo cord is attached. As a neck, you can use a piece of cartridge from an electric bulb. The central part can be strengthened by circumcuting the part of the network and putting it in the center so that it goes beyond the neck somewhere by 10 cm. The superimposed patch should be well secured by the fishing line throughout the perimeter.
  • After the network is already practically ready, it can be started to install the sling. As mentioned above, a line is used as a sling, 1 mm thick. Slings are tied to the cargo cord every 40 cm. All slings are skipped through the central neck and tied to the main cord.
  • At the other end of the main cord, a loop is formed, which serves to reliably hold the tackle with hand.

Step-by-step like, instruction knit network

Initially, the network was made manually knit. Of course, this occupies a process a lot of time and requires amazing, but many fishermen prefer self-made fishing so, networks as under certain efforts it will be very strong.

Each material has its own pluses and cons. For example, the fishing capronic of the thread network is much stronger, but it is easily confused and take the catch of tackle from it. It is difficult from the loss of lungs, they are easy to deploy, but they are only suitable for fishing on small fish views. Large and strong copies of easily networks in a hole and float (Figure 1).

Fisherman 1. Drawing network can also be associated

Hands should be taken into account in the calculation than. Threads more than this indicator, the topics are stronger. But in this case, you need to stick to the middle of the gold, as it is too large and the thick network will be noticeable in water, especially in the nodal areas of the compounds, and the catch is simply will leave. Too out of the network of fine rope, it is easy to rush and not for fishing of large species.

The difference of Spanish

Casting with a small diameter ring resembles a Spanish. When lifting a catch, a small ring pulls up a braid and presses her to the rope. Such recesses are used instead of frisbee with sharp wind turbines when other grids spin.

Constructive such:

  • no rows are needed;
  • fixing the main cable only to the center of the network;
  • Georgic hanging further from the grid diameter.

Where to catch trout in winter?

More and more in the country in different regions, paid ending farms appear. And it is not by chance. Every day there is growing among fishermen. The demand is polished by trout.

For some, trout farms, it is a business, with serve only to extract profits. For others, it is a vacation from urban bustle and heavy everyday life.

Fishing has long taken a certain place in the life of every person. It is an excellent holiday for the whole family, charges energy for the next week. Paid ending facilities for recreation with family are with colossal demand. Basically, the catch on such farms is guaranteed, and if you know the prospective points, you can catch well at all.

When choosing a place on the reservoir for fishing, you need to consider such factors:

"When did the trout reservoir?" And how much passed from the moment of time. If Trout started in the water a long time (from 2 years and more), then she already has its favorite parking lots and feces of feeding. In these places, she will be until the end of his life. Change your favorite trout location can only in one case: if her life will threaten the danger.

Of all this, we can conclude that you should not make noise on ice too much, in the fields of trout. Thus, without provoking it to leave this place. If the trout in the water was launched quite recently, it has not yet decided on the place, and constantly migrates on the reservoir from the place to the place.

The first thing to do is to calculate its movement. To do this, you need to know the relief of the reservoir, various brings and detections of depths. If you do not know, then you are unlikely to catch trout on such a reservoir.

How to learn trout travel paths on an unfamiliar reservoir:

The first thing to be done is to the maximum study the relief of the bottom and find the brow. The method of finding the browch is the same as usual: the wells are drilled, ranging from the shore, slowly moving towards the opposite shore. When finding a brow, a perspective place of fishing will be at the beginning of the recession to the depth;

Ask for workers of the Forevian economy. They certainly know all promising ending places. Even if they prompt the best place, yet without a catch you will not stay;

Read forums and social networks in this place. Ask for knowledgeable fishermen who have not once visited this reservoir;

Be sure to clean up old wells, if any. There is a very high probability that these wells are workers, and brought a good fishing catch.

Despite the foregoing, it is possible to successfully catch the trout, not only from the bottom, but also in the floor of the water. Therefore, to ride the wells at different depths. If the kernel was and suddenly stopped, do not spin off the place, first try to change the depth.

Casting networkOver the years of existence of the fishing industry, people invented many devices for catching the inhabitants of the depths. Some of them have a complex design, cost hundreds of dollars and require the right approach. Others are very simple and understandable, so even newcomers can handle them. Among such gears are the casting network, which is easy to make with your own hands.

General characteristics and principle of work

The casting network has many other names. , eg:

  1. Cape.
  2. Cut.
  3. Parachute.
  4. Covered.

And although the tackle is characterized by special functionality and low cost, only a few fishermen use it for fishing. It is not strange, because since ancient times, fishing with the use of such adaptation was considered a classic of the fishing genre in South America and Asia. Local fishermen knew the mass of tricks that allowed them to achieve astounding results and get a trophy prey from water depths.

Description of the casting networkModern tourists are still surprised how the native fishermen will be thrown into the distant distance of the bundle of incomprehensible origin, which is then turning into a large round network. And only two minutes goes, as a rich catch of a rich catch with the most varied lively. Of course, after such amazement, many people had a completely justified desire to bring a similar network to their homeland. The outlets began to appear a modernized casting tackle, which quickly won worldwide popularity, becoming rightfully an amazing solution for fishing.

The principle of using the casting network is very simple and understandable:

  1. The network is collected on hand accordingly (so that it is easily turned in flight).
  2. Horizontally pounce on the water, after which it covers a certain area of ​​the reservoir.

After lowering the network, the network is pulled out for the cord attached to the base. Fish can be caught without immersion tackle on the bottom, but provided that several modified design will be applied.

An example of an American type casting network

On the shelves of fishing stores are offered Two main varieties of casting gear:

  1. American.
  2. Spanish.

The first type is characterized by special convenience of casting, increased catchiness and simplicity of independent manufacture. But Spanish models are more effective for catching in hard-to-reach places with an uncomfortable underwater terrain. They are much less rarely cling to stones, fuses and other obstacles at the bottom.

American casting networks consist of such elements:

  1. The mains canvas are made of durable monofilament, which is processed by a special tool that provides increased softness and strength. To ensure the free opening of the network, it is pre-stretched in production.
  2. The principle of operation of the American casting networkThe cargo cord is a twist of two polyethylene cords with a smaller diameter that demonstrate increased strength and wear resistance. When pulling the network to the shore of the shipped, the bag is connected and form a bag where the caught prey accumulates. In the casting networks there is an additional lacing for a solid compound of a cargo cord with main loads. The weight of each of them is 26 grams.
  3. To prevent frequent twist, the tackle is equipped with a carbine.
  4. The horn is made of composite materials and is intended to collect the network at the top.
  5. Leskaya stirred are made of high-quality monofilament fishing line.
  6. The casting cord is made of polyethylene, which does not absorb water, but it retains excellent buoyancy.

Design features gear

As for the design of the casting network , it consists of a network canvase in the form of the right circle, the edge of which will be covered with a cord with pretty heavy vessels. The retardation of the network is carried out by means of a central woven cord (cracked options cannot be used) with a sufficiently large thickness, as a rule, 5-6 millimeters. The length of this cord is 4-4.5 m, although most of the fishermen doubles it over time. The end of the cord is equipped with a loop with a diameter of 20-25 centimeters.

In the American version, the central cord is fastened with another end to various stalls that are extended to the cargo cord. In Spanish models, it is fixed to the central part of the network. It is this feature that distinguishes tackle, identifying a different principle of operation.

Pulling out american cape , tightening the cargo cord through stable, which is necessary to collect the device to a compact lump, from which there is no exit for fish. When the Spanish network is pulling out, then all sangs moved to the central part, and under the influence of their own severity they close the output.

In American models in the central part there is a small hole of the round shape, the diameter of which is 5-6 centimeters. The mains canvas on the edges is fixed to the sputter from plastic or fluoroplasty.

Making your own hands

Many fishermen refuse to buy geada, believing that Self-made cape (With their own hands to make it very simple) - this is a more appropriate option. Enough to follow the manual:

  1. Knitting casting networkSerebla from lead is evenly placed along the length of the cargo cord at a distance of 10-12 centimeters from each other. Their weight is selected taking into account the size of the network and varies in the range of 20-35 grams. In shape, they resemble a strongly elongated cylinder, since the classic products of the spherical shape are useless, because they can easily fall into the network cell. If we are talking about homemade loads, they need to thoroughly process and clean from all sorts of irregularities when casting.
  2. For the manufacture of sling, it is possible to use only mononon: the woven fishing line significantly complicates the process of catching. The optimal diameter is 1 mm and more, and the length is slightly larger than the gear radius. When attaching alone, 50 centimeters is observed to the cargo cord, so their number is selected with the size of the network. If the plastic sleeve has several holes, then through each of them you need to skip it, leading to the appropriate edge without intersecting.
  3. A knot that collects stirred into one common lump is made compact and neat, so that the tails sticking towards the tails. Considering the appearance of a torque when completing the cast, this node is tied to a traction central cord by means of durable helicopter. In some cases, a plastic disk is installed in front of the node, the diameter of which is 3-4 centimeters.

Optimal network size for beginner

Some believe that it is better to learn to work with small devices. This will speed up the learning process. And others recommend immediately go to professional models. In this case It is necessary to be guided by the physical parameters of the fisherman: The higher its growth and longer arm, the easier it will be cast a large-scale network.

Optimal Casting Network SizeFirst of all, you need to make sure that you are ready to pay a few hours of your time to learn the basic subtleties of working with the casting network. True fans catching predatory fish on the lives consider such a tackle indispensable, because in some cases it is impossible to catch a fishing fishing rod or a boilers. In addition, it takes a lot of time and effort. But the casting network allows you to get several dozen suitable instances from the water in a short time.

So if you are interested in fishing rather than large prey, it is better to buy a simple three-function network, and the problem of searching the livery will disappear forever. In addition, you will always have chances to extend large prey.

If the emphasis is placed on a more professional catch, and the purchased network will become the main working tool, it is advisable to immediately buy a model with a radius of 1.7-2 meters. And although learning will be much more complicated, but in the future you can easily go to a decadeful option.

Suitable techniques of Zabrosov

There are several techniques for casting a casting network which differ in phases and other features. The traction cord needs to be collected by rings in the left hand, and take the tackle with an elongated hand for the central part (or sleeve), easy to shake and straighten. If a loop was formed during the process, they need to be strained with a free hand.

Next, it is necessary to intercept the right hand to the top of the tackle and collect one or two loops in one hand. At the next stage there is a cargo cord. It must be taken over two points with both hands, and arranging them quite wide enough.

Casting Track TechniqueThe next action is to cast itself. It is done after two or three swing movements or after a wide shim, in the process of which the fisherman is unfolded by the body almost 180 degrees. Special attention is paid to the plane on which the tackle moves. When deploying on the fly, the casting tackle should observe the most common trajectory, finally turning shortly before contact with the water surface. It is important to manifest a certain force of a throw, training and gaining the necessary skills.

There are many other, no less interesting and efficient solutions. Almost all fishermen There are one unique techniques . For example, it is at all necessary to collect a traction cord with rings on hand, you can leave it under your feet, but provided that there are no obstacles on the shore that may interfere with normal movement. This significantly reduces the time of preparation for throwing, increasing the number of shots, as well as increasing the size of the catch.

Not the largest networks can be cast without collecting the upper part in the loop. Both hands remain raised and placed as wide as possible, since they need to take a cargo cord and collect surplus in the loop, 2-3 each hand.

Perspective place for fishing

Start catching in too deep places where there is a rapid flow, useless . It is better to abandon areas with a corrjer or abundant vegetation, steep underwater "brings" and other obstacles. If you catch from the shore, and not with a swimming agent, it is better to avoid places where there are too many trees and bushes, as well as various annual vegetation, including wormwoods and bunigns.

Fishing is ineffective with cliffs and embankments of bridges, towering over the surface of water more than two meters. When fishing in unknown places, the risk of hooks and network damage increases.

After the cord with the cargo is at the bottom, you need to choose the tackle with sharp jerks. With their help, you can quickly reduce loaded together and close the exit for caught prey. Another network must be raised over the bottom to minimize the hooks.

Fishing with a casting networkCatch the livery and any other minor prey in such a way very simple. All that is required from fisherman - It is correct to choose a promising area and perform an accurate cast . In most cases, the trifle is obtained by large flocks, so a huge amount of fish can be obtained at a time. It is not necessary to use a swimming agent for such purposes, it is much more convenient to throw the tackle from the shore.

Large representatives lead a single lifestyle, preferred from the sectors distant from the coastal area, where there are squals, stones and other obstacles. To catch them, you need to make a lot of effort and effort.

Fishing the casting network is really interesting, and for someone and a new occupation, requiring proper training and effort. The responsible approach and compliance with the basic rules will achieve good results in this difficult, but exciting business.

Loading...

Modern fishermen do not suffer a disadvantage in any gears for his beloved classes. Shopping points offer such a wide variety of products for fishing that they simply scatter eyes. Sometimes it is quite difficult to choose in such a variety, but knowing a specific goal solution quite simply comes.

But still, even with such a bright and huge number of proposals, many prefer to use homemade assistants in this matter.

Masters - homemade self-telkins are so well prepared for the process of creating different gears, which can do any. All this is up to the point that even the lure in the form of silicone bars get their own hands.

So different networks are made by avid fishermen at home very effectively.

Painty the casting networks made by their own hands, photos of which show their variety. And about what is the data of tackle and how to do them, we will talk in this material.

Summary:

What does the casting design look like

Making a casting network with their own hands implies a preliminary study of the design. An American type model in most cases is considered the most common.

The composition of this type of toast fisherman has the following details:

The wicker base made from a special monofilament material. In the production of the canvas is treated with a special substance so that the network as a result is soft and pliable. For the right and convenient disclosure, it is pre-stretched at the enterprise.

The second component is a cord with loads that helps when pulling out from the water to collect a network and all the extraction, which falls into it. With the help of tightening the network, the fish no longer has the ability to get out of the trap.

Also available on the carbine network, which does not allow twisting tackle.

There is a horn that helps to collect the top of the network.

Another component is a raver cord. It is made of polypropylene, which after throwing remains on the surface, due to the floating abilities of the material.

Principle of operation and features of tackle

The casting network of any type and model has constructive features and characteristics of action. The most important thing online is the wicker canvas itself. It is a smooth circle with different diameters depending on the model.

At the edges from the outside, the circle edges a special cord. There are loads on this part, which provide good network assembly ability and its convenient cast.

About how to tie the casting network with your own hands, you can watch video lessons on the network.

In order to pull out the network, it provides a central cord that is woven from several. In the case of the American network model, the opposite end of this cord is attached to the stalls that the network collects in a closed state.

And in the model of the Spanish network, this cord is attached simply to the central part. In this feature, the main difference between the same option from the other.

The network of the American type model in its design pulls all the loads and closes the network with a sling. It helps reliably close the production. The Spanish model with a cord pulls up the goods into the center, they are closed.

Thus, it turns out that protection against the loss of production is as reliable. Therefore, before making a casting network with your own hands, you should choose a more convenient option.

How to make a casting network

The creation of a network of such a format at home is not so complicated, so many fishermen choose exactly such a kind.

To begin with, good cylindrical laid goods are required. The weight of each of them is determined by the features of the dimensions of the wicker part. It is better to better make detailed drawings of the casting network.

Monolesca will be required on the slings. Only in this variant will be excluded due to fishing.

When using a plastic sleeve, it is necessary to clearly observe the order of filament. In the sleeve with several holes, the threads are made in the sequence in which they go when fastening the sling to loads.

Thus it becomes clear that the network assembly is not a difficult thing and in the presence of sufficient experience and knowledge will cope anyone. Ring for the casting network, made with your own hands you can equip a plastic disk.

Photo of the casting network with their own hands

Help the project, share in social networks;)

Casting network

For those who want to make a casting network with their own hands, you may be useful to my experience. For the basis of the manufacture of two existing American-made samples were taken - American Joy Fish 10 'Radius 1 "SQ Professional Premium Mullet and Spanish Johnson Bag Net (Mullet) 12 'Radius 1. For more than three years I have been engaged in casting fishing and a small diameter network, and with small cells have not been not interesting for a long time, so I planned a network with a radius of 4 meters with a cell of 30 mm. On large fish. Shapes are made of seteps, in Joy Fish 6 sectors, the cut is very simple, the network is lying on the diagonal, the wedge from above has an angle of 90 degrees, in Johnson Bag Net 8 sectors, there wedges are narrower and rounded under a smaller angle. Creation features Samples and own manufacturers are presented in the following table:

Name Joy Fish SQ. Jonson Bag Net. Vasilii Net.
Type of network American Spaniard American
Futi Radius / See / Cells 10/300/61 12/360/78 actually 320 with linked pockets, 390 without pockets 13.3 / 400/67
Cell inches / cm / diagonal See 1x1 / 2.5x2.5 / 3,53 1x1 / 2.5x2.5 / 3,53 1.2x1.2 / 3.0x3.0 / 4.24
Number of sectors 68ten
Cells on the sector thirteen 712 without top
Cells from the bottom of the sector one hundred 86. 67.
Cells from the bottom of the network 600. 688. 670.
Cell length from the bottom of the network during disclosure, without a cargo cord, see 2118. 2429. 2841.
Sector Circle Length. 300. 245. 250.
Circle Circle Length / Cargo Cord See. 1800. 1960. 2500.
Thickness of the fishing line 0.52. 0.47 0.5.
Weight network 5600. 5000. 5800.
Weight of one cargo G. thirty thirty 20

For the manufacture of Network acquired: Materials for the manufacture of casting network1. Crayfish metathedral from fishing line 0.5 mm cell 30 mm. - Height 3 M. - Length 60 m., Enough for 2 networks; 2. Cord braided Danline 4.0 mm (100 m), cargo cord, 25 meters need 25 meters according to the circumference length formula; 3. Cord Braided Aqua Sports 7.5 mm (30 m), shock cord, 7 meters required on the network; 4. Cargo cylinder 20g. 250 pieces - 5kg., Comfortable weight of the network for throwing out of the water or an uncomfortable shore from about 5 kg.; 5. Leske 1 mm. 150 m for sling, there will be 36 sling of 4.05 m.; 6. Fastening the neckline; 7. Device for fastening the sling to the Dragon Head striking cord; 8. Lavsanov's threads 350l 100 m. To tie the cargo cord to the network travelers; 9. Lesk 0.4 100 m. To bind sectors.

Manufacturing process

The first thing from the network must be carved wedges. Principle Croy Figures are shown in the following drawings: Fig.1 of the cutting network on the wedges. Wedges lie one after another, like a teeth of a saw.

Cast Net.Fig.2 You can open all the networks at once, stretching it out for the corners and folding the number of times, and then cut diagonally.

16_raskroyFig. 3 with a string is especially important that the parties A and B were the same length and moved at one angle. Checked with primary marking of wedges. Secure the top of the network and pulling it along the corners of the wedge, as shown by the arrows, make sure that the length of the parties A and B is equal. Incorrect wedge will result in networks.

Casal Casting NetworkFig. 4 Each even wedge turns over a narrow part up and all wedges are stitched with each other.

Network CastingFeatures with a launch of the network: 1. Kliniev should be an even number for symmetry - 6.8, 10 or more, I took 10 wedges; 2. Wedges must be taken with a margin so that with the opened network, they were not too stretched, it took as a basis that if the cell is distinguished by 50%, its size diagonally will be 42 mm., Respectively, if the circumference length is for the network with a radius of 4 meters 25 meters, At the bottom of the network should be 2500 / 4.2 = 595 cells or 60 cells on the minimum sector; 3. On one side of the network recalled 12 cells (top of the network), on the other 67 cells (bottom of the network), on the next wedge, on the contrary. I stretched the network between the marked places and cut the scissors.4. If you drew attention, a network-high 3 meter, and a 4 meter network. The upstairs will be laid another part of 4 wedges with a length of 1 meter, considered that for the top of the network, many wedges do not make sense .5. The carved wedges are folded together at the site of the cut (this is important) and are tensioned for the entire length so that there is no skew, and then stitched by a cluster with a regular fishing line. This is the longest process. The cargo cord is taken, 25 meters are cut off. Loads on the cord, they must be not detachable so that they do not cling. The cord is sewn and in place of the connection fasten the cargo. We distribute loads evenly, I have about 10 centimeters and fix it, flattening with a hammer. We get the bottom of the network on the cargo cord. We divide the cargo cord for 10 sectors, 2.5 meters, attaching the edges of the wedges to the cargo cord in these places, then stretch the cargo cord on one site and evenly distributing the netwent, tie the shuttle to the cord and so all 10 sectors. Stage remained. Hanging gridUp the main network tie an additional part with a length of 1 meter, 120 cells from below, 40 cells from above. The upper cells are planted on a thin cord and fastened on the neck. Matching the fishing line 1 mm. For a sling into pieces of 4.05 m. Bind the slings after 70 cm. To the cargo cord by the "Constrictor" node. Next, in turn, we produce the other end of the sling into the special holes "Dragon Head" (36 holes) and tie a double knot. We draw "Dragon Head" from within the network through the neck outside. I want to emphasize that the use of "Dragon Head" seems to be a waste of money, but it is not. This device has saved me a network for many times during the hooks behind the stones and protrusions at the bottom. As a rule, it jumps out one or more sling through the hole, the network is revealed and released from the hook. It took the tight cord. There should be no irregularities in the cord attachment site, the cord is sewn among themselves, remove the core from the edge, and the edge itself is gently distributing on the main cord. At the other end of the cast cord, we make a loop for fastening to hand. Suiter, cords and cargo were purchased in St. Petersburg through the online store, special components via eBay. There is a negative cell with a smaller cell, but the fishing line becomes thinner - 0.3-0.4 mm. With nodes to experiment, many nodes are weakened. Try. I will give comments and questions on this topic. I still have the components for the manufacture of the second network, I will try to modify the process to perfection. I want to try to use a galvanized chain instead of goods. When fishing, the network is revealed well and is not inferior to factory networks. The cost of about 4,000 rubles. The term of network manufacturing in this method is 2-3 days and you will have an excellent casting superlover Findfish Profi, so to speak!

Casting fishing network - the original fascinating type zakid network, is used for fishing.

How to use it?

The principle of fishing with the help of such a means is that the fish is entangled in, poured into the water, grid. How to use it correctly? To begin with, the fisherman windshes the network on hand. Further, a special throw throws it above the surface of the river. The correct movement is to learn in advance. Racing in the air, the fishing net is immersed in water, and covers its defined area - it depends on the size of the tackle. When the necessary part of the Tenet reaches the bottom, they stretch ashore, along with the confused fish. The water that was on the spot where the network fell, naturally, passes through the cape. Therefore, the catcher pulls on the coast only the fishing tackle and the catch itself.

Casting network with your own hands

The effectiveness of the casting network

It should be noted that there is some of the most common tackles for fishing. This inventory has a number of advantages. First, when using networks, the catch is large than when fishing with a fishing rod. Yes, and the process proceeds faster. Secondly, dealing with fishing on the fishing rod, it is necessary to take food or other bait, which does not require the network. And the main plus awning is that the fish is not damaged by crochet or other additional gear. Thanks to this, it remains alive and the whole, it means that it will not be spoiled soon. So with confidence it can be said that the fishing of the casting network is most effective today.

But you should be very attentive when using similar gears. It is extremely important to hold the traction rope in hand or consolidate it on the belt. If it is slipping into the water, the network is already hardly possible to get. And this situation will not only leave you without gear, but also gives problems to many plants and animals of the river, and can also bring difficulties by sailing past by boats.

Fishing net with your own hands

Lack of casting network

The only minus of such adverts is their cost. Since networks are more efficient in fishing detail and bring the best catch, the fishing rod moved to the background. It is now used by fishing lovers, for whom it is not a catch, but the impressions gained. For real professionals who are interested in income, you need something. Therefore, the demand for them is growing and the price, respectively, too.

Buy cheap tackle is not worth it. Especially if you enjoy them more than once. After all, throwing them into the water will often have. The poor quality inventory can only spoil all fishing. Good networks at a low price are unlikely to be found in today's market. Therefore, many decide to make a casting network with their own hands.

Casting Network with Ring

Types of casting networks

Before you start knitting the casting network with your own hands, you need to decide which tackle you want to do. All fishing capes are circles of a wicker canvase, to the edges of which special weights are sewn. But there are different types of quinting networks for fishing. The main ones are American and Spanish.

American

This is a casting network with a ring. It consists of many parts of a triangular wicker cloth. They are stitched in such a way that as a result, the mesh has the form of the dome. The bottom of the circumference is trimmed by a special shipped with a cord, from which slings are diverged along the entire boundary. These are special ropes that are part of the fishing grid. And they are always located on the inside of the gear. At the same time they pass from the Niza network to its top. At the top of the system, the slings are stitched into a kind of ring around which bags are collected.

Operating principle

Since the American network has a ring, it is much more convenient to use it. It throws up with greater clarity and brings the corresponding catch. How to use it correctly?

Experienced fishermen advise to shake the nets before throwing. From this action, the shut-off chains are cracking, which will continue to make fishing.

To begin with, it follows the rings to wind a traction cord on their left hand. Next, shake the network, holding them for the sleeve. Check that anywhere there is no interfering loop or nodes.

The upper part is also transferred to the left hand, continuing to hold the cord. Next, you need to unwind the cargo rope. To do this, take it in both hands and arrange them as widely as possible to stretch it as much as possible. If everything is done correctly, then the challenges look unfolded and ready to throw.

Take a couple of swinging movements, then aim and throw the network into the water.

During the throw, it is completely revealed above the surface of the reservoir, and with the help of attached goods is quickly immersed on the bottom. When you pull it back, the tackle will turn into a bag, inside of which all the extraction remains. American - Standard fishing casting network.

casting casting network

Spaniard

The cape network of this type has many similarities with an American. Therefore, it has a similar design and is also very popular with fishermen. But you should not confuse these two types of networks. Their main difference is that in Spanish brakes, the central cord is stitched to the center of the gear, and not to their lower part. Also, this type of fishing gear does not have its own ring on top. Therefore, the catch is drawn not for the sleeve or ring, but for a special rope. Spanish has cargo suspensions, but they do not collect it in the water in the shape of the bag, but are used only for better immersion than the water. When the fisherman pulls the net to the shore, their central part forms peculiar pockets, which they pull the fish confused in them.

Principle of action of Spanish networks

Since the Spanish cape and American parachute is distinguished by its structure, the techniques of the casting and the principles of their action have certain differences.

Thick traction cord wrap on the left hand. Take the top one third of the networks to another and stretch them as wide as possible. Then, throw the tackle over the seamless water section. At the same time, it is not advisable to maintain the fixedness of its hull. When casting a casting network, strong shuffles are needed, and experienced fishermen recommend turning their body 180 degrees during a throw. Make sure that the networks flew with the correct trajectory - after the highest point of their flight, they must decline to the surface of the water without a sharp drop. A gradual fall will ensure that the tent is properly disclosed.

Immersing into the water, tackle omit the fish and delay it in the pockets at the center. After the catch will be enough in them, you can pull the net ashore. To do this, use traction cord.

Application of casting network

Necessary network weaving materials

In order to independently make fishing brackets require special materials. To knit the fishing network, you need to purchase high-quality networks. It is better to buy in the store, rather than weave themselves, since the design of this material is very complicated. It is made of strips, different in width and length. Although experts that have experience in fishing can try to evil the canvas on their own. They know exactly how to make a casting network with their own hands.

It is important to decide in advance with the size of future tackles to buy the required amount of material. As a rule, the size of the network is considered the length of the circle, and the diameter is equal to the width of the acquired canvas multiplied by two. To properly calculate the size, use the "2AP = B" formula. Here a is the width of the canvas, P is a number equal to 3.14 and B - the size of the resulting grid.

The length of the material may correspond to its width, so that in this case the calculations are not required.

The cargo cord should be more than 4mm in thickness. Its length can reach up to five meters. Both parameters are very important. Satisfying length guarantees good throws, and if the rope is quite thick and durable, it will be easy to keep it, and it will not cut his hands while pulling the gear ashore.

как сделать кастинговую сеть

How to make a casting network with your own hands?

Now you can proceed to the timing of networks. The canvas need to be cut into equal triangles, which are then stitched in the form of a circle. Further, along its entire length, a wicker rope is fixed. On it at a distance of 10 cm flew from each other. The optimal option will be lead lumps.

To do this correctly, it will not be superfluous to practice professionals who demonstrate beginners how to make a casting network.

The central ring is sewn at a distance of one third part of the network from the vertex. Through it all over the perimeter, the rages will be descended - a regular fishing line is used for their manufacture. Its end will be tied to a thrown rope, and the other - to a wicker cord. Slings are tied with a thin fishing line - its thickness should not exceed 0.4 mm.

In order to properly weave the fishing network with your own hands, it will not hurt to refer to experienced fishermen who know how to knit the casting network. This will save time and strength.

Casting network. Blueprints

рыбалка кастинговой сетью

In order to fully deal with the design, it is better to study the drawings and their sketches. This will help not miss the slightest detail during the manufacture of own fishing cape.

To do everything correctly, it will not be superfluous to view the learning videos showing newcomers how to make a casting network.

Casting network with your own hands

The casting network was widespread on most of Russia, especially recently. Before that, it was used mainly in southern countries. To apply it, it is necessary to spend not enough effort. The fact is that the finished network weighs from 5 to 7.5 kg, so you don't care for a lot, since the owner technique suggests frequent casts.

But the result will not wait long for a long time. It can be used when catching any fish, both large and small. Small fish can be used as bait, for catching predatory species of fish.

What is better to buy or do yourself?

купить или сделать самостоятельно

There is a casting network is not cheap. At the same time, you should not buy any tackle, but to give preference to the one that is most convenient. After all, it will have to throw quite often.

Independent manufacture just makes it possible to do what you need. In any case, everyone should solve himself, buying the tackle or make it yourself.

Design features

Конструкция сети

Such a fishing tackle represents a round network, along the edges of which cargo are fixed. Although it is not an ordinary tackle, but it is used all over the world and Russia is no exception. The main problem is the technique of its use, as well as in fish density at certain areas of the reservoir. To master the process of throwing tackle, you need to train a lot. And it consists of the following elements.

In fact, it is a segment of fishing gear, but only a round form. On the edge of this circle, the cargo cord is stitched, which includes a greater number of not large loads. Directly to the cord attached peculiar slings from the fishing line, which pass under the grid and go to the top, through a special hole. After that, they are going to the bundle and are attached to the rope, with the help of which they are cast. The length of the cord can be within 4-7 meters.

This tackle is thrown into the water, after which it is neatly pulled out of the water already with fish.

Casting Networks American Sample

Casting Networks American Sample

At the same time, it does not mean specific manufacturers of this product or specific countries, and the names of this gear in different countries have developed over many years. In addition, fishing technology remains the same.

American samples are characterized by the presence of powerful sling and heavier loads located along the edges of the tackle. The principle of operation lies in the fact that in the process of its pulling out the lower edges are closed, under the action of a sling, capturing fish. In addition, at the end of the cord there is a loop, with the help of which the tackle is held by hand.

Spanish Sample Casting

Spanish Sample Casting

This type of gear is characterized by the presence of special pockets that are designed for fishing. This is achieved by the fact that the loads are located not strictly along the edges, but in the disintegration throughout the tackle, due to which pockets are formed. It is believed that such a tackle is more catchy.

Knitting the casting network do it yourself

This network is not at all difficult to make yourself. Here the main thing is to be desire and necessity in it. It is very important, at this stage, to decide that the casting network is suitable for the existing conditions of fishing. It is very important that in the reservoir there is enough fish. But first you need to prepare all the components for its manufacture.

What is needed for this?

Casting network with your own hands

  • Naturally, the manufacture of such a tackle will need a network. In this case, there are 2 options for its acquisition.
  • The network can be associated independently, but this will require a lot of time. Among other things, you need to own the technique of knitting networks. This option has one, but a significant advantage. Knitting technique will make it possible to obtain one-piece networks, which can significantly affect the effectiveness of fishing.
  • There is another option based on the purchase of a finished network. The only problem is that the network is implemented by strips of different lengths and widths. The task is only to acquire a network of suitable sizes, with the corresponding cells of the cells, which is not always possible.
  • It should be very careful to determine the sizes of the network, to make the tackle of the desired size. Since the casting networks have a round shape, their value is not related to the network diameter, but to the length of its circle. As a rule, the diameter of the tackle is equal to the two sizes of the network-width. Therefore, the size can be calculated based on the following formula.
  • Network size = 2x3.14 x width of the network.
  • Approximately so much you need to cut off the network-length at its length.
  • The second, no less important part of the design is a braided cord, the thickness of which can correspond to 4 mm. This is the so-called cargo cord, which is located around the perimeter of the future tackle. Its length is selected depending on the size of the network. It is possible to determine the size of the cargo cord after laying the harvested network segments. Loads are usually attached to this cord. Casting Network Manufacturing Technique
  • A braided cord is needed, 7-8 mm thick for throwing the network into water, and its length should be about 7 meters. Although to begin with, it makes sense to use a shorter cord. After the application technique is mastered, it makes sense and increase the length of the cord. The further the casting network will be abandoned, the greater the chance of catching fish. No matter how, but the fish can be afraid of the network dropped into the water. At the same time, the cord should not be too thin, as it will cut hands when cast.
  • Set of cargo. The weight of each cargo is selected within 20-30 grams. Loads are attached throughout the circumference, at a distance of about 10 cm one from the other. It is not difficult to calculate that they need a lot - up to 250 pieces. Therefore, it is not difficult to calculate how much the finished network will weigh. Loads can be made independently.
  • You need a central ring. The design assumes that rafrops will be output through this ring, which will then go into the mount connecting them with the casting cord.
  • Up to 150 meters of fishing line, up to 1 mm thick, from which the slings should be made. The slings are connected with one end with a cargo cord, and another end, with a cord for throwing.
  • You need a Dragon HEAD device, to connect all the sling at the site of accession to the main cord. Although you can do without a similar device, linking all the slings and cord with a reliable node. For greater reliability, the node is impregnated with epoxy glue.
  • You will also need lavasan threads (up to 100 meters) for fastening a cargo cord to the base of the network. Alternatively, you can use a similar fishing line.
  • Lerke, thickness up to 0.4 mm thick for fastening the parts of the NETEVETNY into one.

Casting Network Manufacturing Technique

  • If there is a maximum width of 3 meters and a length of 60 meters, then it should be revealed to the segments of the required size. This is done as follows.
  • The cutting angle should be about 45 degrees. The number of segments is chosen by even quantity, for example, 6, 8, 10 wedges, etc. To understand the manufacturing process, you should give preference to 10 wedges. If you fold together the long sides of the wedges, they will give the length of the circumference of the future network. After the final sizes of the cutting, the network is cut into separate fragments, according to the drawing. After that, the resulting billets add up together. At this stage, you can determine the length of the cargo cord.
  • Disinted billets (wedges), using a 0.4 mm fishing line together. As a result, a round network should be turned out or something similar to the circle. In any case, the form of the network can be corrected.
  • Now you can go checked. They are not at all difficult to make themselves, especially since simple and affordable materials will be needed.
  • First you have to buy in the store there are not many building gypsum and stir it by adding the desired amount of water. The mixture should not be too thick, while it should be stirred to a homogeneous state. After that, the mixture is laid out in a pre-prepared form. Then the sample was taken and squeezed in the gypsum corresponding form. It is necessary to ensure that the air outlet hole is.
  • After that, a hole for pouring lead is done. To the center of the scene took place, a nail is installed in the center of the form.
  • After full pouring, the form is abundantly covered with a shampoo. The workpiece should be placed in a container with high sides. The sample must be half into the form. After that, the sample is again filled with plaster, after which everything should dry well. If you do not organize openings for the exit, then the lead will not be able to fully and qualitatively fill out the form.
  • As a result, loads that have an extended shape with the presence of a through hole passing through the center of the cargo should be obtained. грузы
  • Preparation of cargo, you can continue the manufacture of tackle. Before fixing the cargo cord, you need to attach loads. They can be simply put on the cord, and then secure them with a hammer blow. In place of the cord connection, the load is also installed and is clamped in the same way as everyone else. The distance between them can be about 10 cm.
  • At the next stage, the cargo cord is attached to the outside of the future tackle. To begin with, it is unfolded throughout the perimeter of the network and in conclusion, they are reliably tied throughout its perimeter.
  • The next stage consists of the formation of the central opening, where the slings will be held. To do this, the harrow is taken and fastened in the center to the sewer in the same way as the cargo cord is attached. As a neck, you can use a piece of cartridge from an electric bulb. The central part can be strengthened by circumcuting the part of the network and putting it in the center so that it goes beyond the neck somewhere by 10 cm. The superimposed patch should be well secured by the fishing line throughout the perimeter.
  • After the network is already practically ready, it can be started to install the sling. As mentioned above, a line is used as a sling, 1 mm thick. Slings are tied to the cargo cord every 40 cm. All slings are skipped through the central neck and tied to the main cord.
  • At the other end of the main cord, a loop is formed, which serves to reliably hold the tackle with hand.

Modernization of the Casting Network of Factory Manufacturing

If you buy the tackle, you can save a lot of time, especially since the time for the fisherman is the weight of gold. At the same time, the casting network is quickly wears due to active operation. As in no way, and the technique of fishing on this tackle suggests its constant throwing and extracting from the water.

  1. As a rule, the cargo cord is wearing, and the loads lose the strength of the attachment. Alternatively, loads can be chopped with a hammer. As a result, loads will stop moving along the cord and wear it. In addition, all the nodes with which the network is tied to the cargo cord should be impregnated with waterproof glue.
  2. When holes in the network appear, they should be seen by appropriate threads or fishing rods. In the presence of large holes, it is better to close them with a network web of the appropriate size.

Technique fishing

The technique of catching is that from the first time it is hardly possible to throw it. It should be collected in the hands accordingly, after which it is thrown into the water. Due to the availability of goods, the edges of the network are much faster on the bottom, covering a certain area. After that, it carefully and slowly begin to pull out of the water. As a result of the action of the sling, the network is going downstairs, closing the place of the fish. Fish, which turned out to be in the area of ​​the network, will not be able to leave the network.

This tackle is not recommended to be used in areas where there is a rapid flow or on the plots of the reservoir, where there are underwater "surprises".

Application of a casting network in fishing fishery

Применение кастинговой сети

Such tackle is used only in private. Despite this, it is also used in industrial fisheries. Application technique is next. With the help of such a device, like a echo sounder, there is a flock of fish, after which the flock surrounds with the help of vertical networks and gradually compress space, increasing the density of the fish. After that, with the help of the casting network, fish are caught.

Naturally, a similar network is effective if a high density of fish is observed. Otherwise, it is not necessary to expect serious results from it. And, nevertheless, if you practice well and learn how to throw the network correctly, you can catch fish on my ear. As a last resort, you can take it and catch your life.

Making an American type casting network with their own hands

Добавить комментарий

Пролистать наверх